Description

The Runner XC is our new paramotor wing for experienced pilots looking for comfort and speed paired with engine and fuel economy on long distance flights.

Its performance is linked to speed gain and comfort on long flights.
In thermal conditions, its stable behaviour provides safety combined with a good soaring.

The Runner XC is available in 7 sizes.
For long distance flights with comfort and fuel economy we recommend flying up to the middle of the weight range.
For pilots looking for more agility and speed over fuel consumption we recommend flying close to the indicated maximum weight.

The Runner XC is the evolution of the Flexus and Auster GT and will fulfil the expectations of the most ambitious pilots with a minimum of 80 hours of experience.

The wing has a 3-4 line hybrid configuration since only such an arrangement allows full adjustment of profile geometry through trimmer operation.

After extensive tests and many long distance flights we concluded that the Runner XC increases engine durability, requires less fuel and motivates the pilot to cover longer distances and, if desired, to make really long cross country lights. The characteristics of the wing result in less engine RPM and vibration coming along with a considerable gain in comfort and perceptible less fatigue of the pilot.

Runner XC – the long distance specialist

Certification

Inspection certificate	150	165	180	195	210	225	240
Certification Number	3517	3518	3519	3520	3521	3522	3523
Load & Shock Test	CERTIF DGAC RUNNER XC

Flight caracteristics

	With new construction technologies the weight, volume and drag (Vectran competition lines) have been reduced.
	The Dual command system makes it possible to operate wide and plane turns or steer and inclined ones;
	The risers are designed for easy use;
	Start and inflation are easy in little space;
	The landing is very easy with the prolonged flair effect moment thus helping with the stall, causing less impact when touching the ground;
	The use of Full Reflex Technology decreases the possibilty of collapse;
	The velocity increases Reflex Technology;

In short, the Runner XC is an equipment to satisfy the needs and demands of paramotor pilots who want more performance, easy handling and safety.

New Tools

The ‘shark mouth’ (PBP) provides greater canopy aerodynamics and greater internal pressure over a wide range of attack angles. The leading edge is reinforced with battens (BT Technology), which significantly improve take-off and protects against deformation during high speed flight.

The new riser system provides excellent accelerated flight control. A higher speed range is achieved by using the speed system and trimmers.

The Runner XC has a 2D Dual Control system where the main control owns an auxiliary steering line linked to the external brakes. This system allows the pilot to differently control the wingtip and the center of the trailing edge, or both, so the pilot can adjust the progression of pulling the trailing edge to suit his preferences.

The main lines are covered and the upper and the gallery uncovered, ensuring higher performance.
The combination of different fabrics provides durability, lightness and dimensional stability to the design, thus ensuring an optimised combination throughout.

Technologies

The RUNNER XC combines our technologies of performance, safety and long life.

	Pressure Booster Profile		4 Risers System
	X Battens		Laser Cut Technology
	Full Hybrid Tecnology		LDT
	3D Shaping		Mini Ribs
	Battens Technology		High Project Aspect Ratio
	Bow Tec		SOL Maxi Stable Reflex
	2D Steering System		Flaps
	High Tech Materials		Duo Speed System

Photos

Technical data

	150	165	180	195	210	225	240
Cells	57	57	57	57	57	57	57
Real Surface	15,03	16,5	18,0	19,5	21,1	22,5	24,1	m2
Real Wingspan	9,48	9,9	10,4	10,8	11,2	11,6	12,0	m
Real A/R	6,0	6,0	6,0	6,0	6,0	6,0	6,0
Projected Surface	13,02	14,3	15,6	16,9	18,2	19,5	20,9	m2
Projected Wingspan	7,66	8,0	8,4	8,7	9,1	9,4	9,7	m
Projected A/R	4,5	4,5	4,5	4,5	4,5	4,5	4,5
Height	607	635	661	686	711	734	757	cm
Maximum Profile	195	205	214	222	231	239	247	cm
Minimum Profile	49	51	54	56	58	60	62	cm
Weight	3,7	4,0	4,3	4,5	4,7	5,0	5,3	kg
Take-off Weight	70-120	70-130	80-130	80-140	90-150	100-160	110-170	kg
Ideal Weight XC	75	85	97	109	123	136	150	Kg
Certification	(DGAC)	(DGAC)	(DGAC)	(DGAC)	(DGAC)	(DGAC)	(DGAC)

Materials

Since 1991 SOL has been producing and following the evolution of materials and products. Our experience makes us choose the materials carefully, thus guaranteeing a good stability and a high safety level. All of the SOL Paragliders are manufactured in our own factory.

Top	WTX 40 PU + Silicon 40 gr/sm – WTX 29 PU + Silicon 29 gr/sm
Bottom	WTX 40 PU + Silicon 40 gr/sm – WTX 29 PU + Silicon 29 gr/sm
Profiles	Pro-Nyl High Tenacity Nylon rip-stop Hard finish 36 gr/sm
Reinforcements	Nylon Maxfio Meada 2,5 mm
Lines	Liros Dyneema PPSLS 0.7 – 1.1 – 1.2 – 1.6 mm – Cousin Vectran 0.6 – 0.9 – 1.0 – 1.2 mm
Carabiners	Ansung Precision 19 mm. 800 kg
Risers	Polyester Venus 19 mm. 1.600 kg
Pulleys	Nylon Sol 12 mm / ISR 16 mm ball bearing

Downloads

Manual		Warranty

Line plan		Info

Delivered with

See viability and color combination costs of your paraglider.

The colors are just illustrative. Ask a dealer for tissue samples or to Pantone C. table.

Runner

Runner XC